Home Apps Auto & Vehicles FFConfigLite
FFConfigLite
FFConfigLite
2.6.2
2.5 MB
Android 4.4+
Feb 10,2025
4.2

Application Description

Diagnostics and Configuration of Ford Focus 2 and C-Max Modules

This guide details diagnostics and configuration for Ford Focus 2 and C-Max vehicles using ELM327 or ELS27 interfaces. These interfaces allow access to various CAN-bus modules:

Accessible Modules and Functions:

  • Engine Control Module (ECM): Retrieve module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145) engines.

  • Instrument Panel (IPC): Access module information, read and clear DTCs, configure module settings, reboot the module, change odometer units, and perform odometer correction (mileage correction).

  • Brake Control Module (BCM): Retrieve module information, read and clear DTCs, configure module settings, reboot the module, reset Dynamic Stability System (DDS) calibration, and perform brake bleeding.

  • Body Control Module (BCM): Access module information, read and clear DTCs, configure module settings (some functions may require a full version), and reboot the module.

  • Airbag Control Module (ACM): Retrieve module information, read and clear DTCs, configure module settings, reboot the module, and clear crash data.

  • Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM.

  • Climate Control Module (CCM): Retrieve module information, read and clear DTCs.

  • Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series radios).

Note: Some features are only available in the full version of the software.

ELM327 Adapter Modification:

For full functionality and access to more modules, a minor modification to the ELM327 adapter may be necessary. Instructions can be found here: Http://forffclub.narod.ru/index/0-2

ELS27 Interface:

ELS27 interfaces can be purchased at: https://els27.ru/. For ELS27USB, set the baud rate to 38400. For ELS27BT, set the baud rate to 2,000,000 using the ELS27 Baudrate utility.

Screenshot

  • FFConfigLite Screenshot 0
  • FFConfigLite Screenshot 1
  • FFConfigLite Screenshot 2
  • FFConfigLite Screenshot 3